Drilling table with multidirectional roller conveyor 1,500 mm x 600 mm incl. portable undercut drilling machine KSDV
Stainless steel
With pneumatic panel fixing (manual control)
2 stop rails
4 swivelling stops
Service unit
Max. edge distance of drill hole in y = 150 mm
Wooden crate
Application
For drilling and undercutting.
Possible usage
With KEIL diamond tipped façade drill bits.
Instructions for use
Rotational speed approx. 10,000 rpm.
Usage of the cooling lubricant 532 500 035 will prolong the life time of the diamond tipped façade drill bit significantly and protect the parts covered in cooling water from corrosion.
Drilling table with roller conveyor KRT
Drilling machine for efficient drilling of KEIL undercut drill holes for use in the workshop or on the building site (total weight approx 90 kg). The multidirectional roller conveyor (1,500 mm x 600 mm) with pneumatic panel fixing equipment warrants very good handling, simple operation and fast conversion to another hole distance.
Once the insertion depth hS has been set, panels of different thicknesses can be drilled without further adjustments.
The depth position of the undercut hole can be chosen in consistence with either the front or the back side of the panel. For undercut drillings in consistence with the front side of the panel the conversion set for front face related must be fitted.
The portable undercut drilling machine can be disassembled and used with the vacuum base (without roller conveyor).
Feet adjustable in height
Machine can be used separately
Max. panel format 1,200 x 600 mm
ACCESSORIES
Set for KRT for front face controlled drilling
For panel thicknesses of 20 and 30 mm
Required for visible side related drilling as a compensation of tolerances in panel thickness with the table KRT