Undercut Fastener
Reveal attachment Type FA with 2 grooved washers
Design
- Aluminium L-bracket incl. 2 serrated washers
For use in
- Assembly with undercut anchors KH type BH
- For the invisible, back-sided attachment of reveal oder lintel panels.
- Natural stone
- Artificial stone
- Manufactured stone
- Ceramics
- Laminate (HPL)
- Synthetic material
- Fibre cement
- Glass ceramics
Instructions for use
- The screwed in threaded pin must fit flush with the tip of the anchor sleeve.
- Use according to approval and KEIL assembly instructions for anchors.
- Please find documents with relevance to building regulations under approvals.
NOTE
- Relevant approvals and consents are available on request.
- Assembly tools (e. g. screw-in tool) on request.
555
Data / Facts
| Leg length | 100/60 mm |
| Centre distance | 50/35 mm |
| Leg width | 60/40 mm |
| Leg thickness | 8/5 mm |
| Further dimensions on request. |
Download
Reveal attachment Type FA with 2 grooved washers
- KEIL offers reveal angle attachments for the attachment of jamb panels to main façade panels with the undercut anchor
- These attachments have been developed from the point of view of a precise and quick assembly as well as a particularly simple handling.
- Place the jamb angle on the drilled façade panel.
- The assembly of the anchor is carried out as a pre-positioned installation with the threaded pin. The serrated washer is fixed with the ratchet nut.
- Alternatively, insert the anchor with the screw and the serrated washer through the slotted hole into the undercut hole and tighten.
- KEIL undercut anchors are monitored externally.
Sophisticated and approved by building authorities
Undercut attachments for façade panels in ventilated rainscreens are nowadays stateof-the-art. The Deutsches Institut für Bautechnik (DIBt; German institute for building technique) drew up an approval concept for this purpose. Please find our current overview of relevant documents on planning permissions under approvals.
General building approvals
General building approvals will be granted for construction products and techniques within the scope of state regulation for which there are no generally acknowledged technical regulations, especially DIN norms, or which differ from them in a significant way. They are reliable verifications of applicability of construction products resp. of types of construction in regard to constructional requirements of buildings.
European Technical Assessments
European Technical Assessments (ETA) will be issued for construction products in the scope of the EU Construction Products Regulation. They evaluate the performance of a construction product.